Prolaser devices

MODEL FX

LASER WELDER FOR CHAIN MACHINES

Model-FX is a LASER Generator with Fiber Optic Delivery, specially developed to integrate LASER welding onto Chain Making Machines. The main advantages of Model-FX are the following:
  • Power Stability, even at High Speed
  • No Black Dust near the welding area
  • Deep Penetration and Welding Strength
  • Smooth and Clean Surface of the Spot
  • Total compatibility with all Chain Making Machines
Available in different configurations (60J - 100J - 150J), powered by Single or Double LASER Generator, thanks to its very efficient LASER Source, Model-FX provides extremely High-Quality Welding, on all precious metals.

Thanks to the highest quality of the LASER beam generated by Model-FX, the welding even of the most reflective metals is made easy.
By focusing energy on small areas up to 200μ (0.2mm) and ensuring minimal heat input, the exposition to the LASER radiation can be precisely limited to the areas to work only.

Equipped with the highest quality electronic components, Model-FX does not fear heavy duty cycle such as 24h/7d and it is capable of standing very high frequencies (3000rpm).

Download Brochure


MODEL-FX chain

Model-FX

The structure of Model-FX is shaped to protect the internal components and, at the same time, the design allows a very efficient ventilation as well as an easy access to the three main areas of the machine (LASER Generator, Cooling System, Electronic Compartment) either for routine and extraordinary maintenance.

The high-efficiency Cooling System guarantees 24h / 7d working cycles, up to 39° C room temperature, without the help of any additional External Chiller.

The command interface is designed to make Model-FX totally compatible/integrable with any chain making machine and the software allows an easy management of work parameters and settings.

The LASER Generator is machine-made from a single Alumina block, which guarantees a strong structural stability. All optical components (lenses, mirrors, lamp, crystal and ceramic cavity) are built in solid on the Alumina block and this special mounting technique takes to zero the risk of misalignment between the LASER generator and all the other Optical components.

Download the Brochure
  • Pro laser Model FX
  • Pro laser Model FX
  • Pro laser Model FX
  • Pro laser Model FX
go top
DUAL CORE chain
  • Pro laser Model FX Dual Core
  • Pro laser Model FX Dual Core
  • Pro laser Model FX Dual Core
  • Pro laser Model FX Dual Core
  • Pro laser Model FX Dual Core

Model-FX "DualCore"

With the aim of offering an innovative solution to optimize costs and space, without compromising on reliability and quality, ProLASER™ has integrated two separate LASER Generators into a single Model-FX.

The innovative Double LASER Generator technology, named "DualCore", integrates two independent LASER Generators within the same unit and allows the application of Model-FX “DualCore” onto two separate Chain Making Machines.

Thanks to its two embedded independent LASER Generators, Model-FX "Dual Core" is capable to deliver full power to each of the fibers simultaneously, managing the power settings individually, as easy as working with two single units.
No beam splitter, no power or time sharing... a real and pure 2x60J, 2x100J or 2x150J.

This special version of Model-FX "DualCore" makes possible to weld on two separated Chain Making Machines or on two different workstations, at the same time.

Model-FX "DualCore" can be programmed to make each of the two LASER outputs free and totally independent from the other one.

Download the Brochure
go top
optics chain

Optical Components

One of the main features that distinguishes Model-FX from other similar products is the quality of optical components which, by minimizing waste of light as well as energy dispersion, increase the LASER efficiency on metals, even the most reflective ones.

The lenses and the components used inside the LASER Generator, as well as inside the Collimator and the Focalizer, are expertly calibrated so to guarantee the maximum efficiency of the LASER beam, allowing the processing of even the most reflective metals with medium-low power.

ProLASER™ has developed and offers, alongside Model-FX, a wide choice of Focalizers which make the application of Model-FX even more versatile.

Cylindrical or 90° shaped.. provided with a 35mm, 50mm or 70mm focal lens, with round or elliptical welding point... each and every application requires a specific focuser, and ProLASER™ has them all.
  • Pro laser Optical Components
  • Pro laser Optical Components
go top
RESULTS chain
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding
  • laser micro welding

Results

ProLASER’s technology became quickly famous, among the giants of the chain industry, thanks to the unbeatable results delivered by its equipment.

Model-FX, be it Single or Double, can deliver results that are yet considered "impossible" by the most.

Thanks to the High-Quality LASER Generator, ProLASER’s technology does successfully weld even the thickest wires, which can then easily stand further processing such as hammering, compacting and limbering, without the use of soldering powder.

Yes, exactly...!! Without the use of any soldering powder.

According to the material to be processed and the thickness of the wire, up to certain thicknesses the soldering powder may be considered "useless".

Finally, you can say your chain in "Soldering Free".

go top
VIDEO chain

Video

Installation after Installation, ProLASER™ has gained a pretty large experience with all type of chains and chain machines.

A visit to our YouTube Channel might allow you a better understanding of the meaning of "DualCore", a better view of how many installations we have all around the world, the variety of chain machines onto Model-FX has been installed, and much more.

The elder FICO's, MGZ's and OMBI's models... the more recent SISMA’s and FASTI’s... or the advanced machines from CIEMMEO... be it CURB, CABLE, ROPE, BISMARK or whatever, in a way or another we made it to set it with Model-FX.
Guarda
  • ProLASER YouTube


go top
Copyright © 2021 Pro S.r.l. - All Rights Reserved